Dental Technology at Advanced Dental Care Center, Chandigarh

​

Equipment is easy to advertise and hard to evaluate. Most dental websites list machines without saying what any of them change for the person in the chair, which leaves you comparing brand names you have no way to judge. This page does it the other way round: what is in the building, and what each thing actually changes about your diagnosis, your appointment count or your result.

​

Everything below is on site at #20, First Floor, Sector 18-A, not at a centre we send you to. That distinction matters more than the specifications, and the reason is explained in the imaging section.

​

Imaging: seeing before deciding

CBCT three-dimensional scanning

A CBCT scan produces a three-dimensional image of the jaw rather than the flat picture an ordinary X-ray gives. For implant treatment it shows how much bone is genuinely available, in height and width, and exactly where the nerve canal and the sinus floor sit. A flat X-ray cannot show width at all, which is why a case can look straightforward on a two-dimensional film and turn out not to be.

It is also used before removing a wisdom tooth that sits close to the nerve, before re-treating a root canal that has failed once already, and to locate impacted canines before orthodontic and surgical treatment are coordinated.

​

The practical value is in the sequence rather than the machine. Where the scanner is at a separate imaging centre, implant planning means one appointment to be referred, a second visit to be scanned, a wait for the report and a third appointment to discuss it. Here the scan, the reading and the plan happen in the same visit. For a patient driving in from outside the tricity, or flying in on fixed dates, that is the difference between a two-week workup and a same-day plan.

Digital X-rays and OPG

Intraoral radiographs and full-jaw OPG images are captured on digital sensors rather than film. The image appears on screen immediately, so there is no waiting for a film to develop and no second appointment if a view needs repeating. Digital sensors are more sensitive than film, so a diagnostic image is obtained at a lower radiation dose, and the darkroom chemicals that film processing requires are not used at all. Images can be enlarged and adjusted on screen while you are still in the chair, and sent to you or to another clinician as a file. More detail is on the digital X-ray page.

Intraoral camera

A pen-sized camera that photographs the inside of your mouth and puts the image on a screen you can see. This exists for one reason: so that a treatment recommendation is something you can look at rather than something you have to take on trust. A cracked cusp, a leaking margin on an old filling or inflamed gum tissue is far more convincing on screen than in a description. It is also how before-and-after records are kept, which matters if you ever need to show another clinician what was done. See the intraoral camera page.

​

Planning: deciding before treating

Digital smile design

For cosmetic cases, the proposed result is designed on screen and, where the case warrants it, built as a physical wax-up before any tooth is touched. You see the proposal, and change it, while changing it still costs nothing. The full process is set out on the smile design page, and completed cases are in the smile gallery.

This applies to porcelain veneers and metal-free crowns and bridges, where the work is irreversible and agreeing the target beforehand is the whole point.

Guided implant surgery

The CBCT scan is used to plan implant positions in software, and that plan is transferred to the mouth through a surgical guide. The position of each implant is worked out before surgery begins rather than judged during it. For All-on-4 and All-on-6 full-arch cases, where the angle of each implant determines whether the final bridge fits, this is the difference between a predictable result and an improvised one.

​

In the treatment room

Surgical motor and physiodispenser

Implant placement and surgical extractions are done with a dedicated surgical motor rather than a standard handpiece. It controls speed and torque precisely and irrigates the site continuously, which keeps the bone cool. Overheating bone during drilling is one of the recognised causes of early implant failure, so this is a piece of equipment whose whole purpose is preventing a complication you would otherwise only discover months later. See the physiodispenser page.

Dental laser

The laser is used for soft-tissue work: gum contouring where a smile shows too much gum, depigmentation of dark gum tissue, and minor procedures around the gum margin before crown or veneer work. Laser treatment of soft tissue produces less bleeding than a scalpel, which usually means the site can be finished without sutures and the result is visible at the same appointment rather than after healing. It is also used in some gum treatment and endodontic protocols. What it can and cannot be used for is covered on the laser dentistry page.

Ultrasonic scaler

Professional cleaning is done with an ultrasonic scaler, which removes hardened deposits by vibration and water rather than by scraping alone. It is quicker and more comfortable than hand instruments for heavy deposits, and hand instruments are still used to finish. See the ultrasonic cleaning page.

​

Implant systems used here

The clinic works with Nobel Biocare, Straumann and Osstem systems rather than a single house brand. This is a deliberate choice with a practical consequence for you: the system is matched to your case instead of your case being fitted to whichever system the clinic happens to stock. It also matters for the long term, because an implant is a component you may need serviced years later, possibly in another country, and widely distributed systems are far easier to obtain parts for than obscure ones.

​

Ask which system is proposed for your case and why. It is a fair question and it should have a specific answer.

​

Sterilisation equipment

Instruments are processed in dry heat sterilisers and dental handpieces in a steam autoclave, with weekly spore testing to confirm each machine is actually killing organisms rather than simply reaching temperature, and an indicator strip in every instrument bag. The full protocol is set out on the infection control page, along with the equipment detail on the autoclave page. If you would like to see the sterilisation area during your visit, ask.

​

What equipment does not do

A clinic with a CBCT scanner is not automatically better than one without. The scan produces information, and information still has to be read by someone who knows what they are looking at. The same image can support two different treatment plans depending on the judgement applied to it. If you are choosing between clinics, the equipment list is worth less than the qualifications of the people using it.

​

Technology also does not make a treatment necessary. A scan is taken because a specific clinical question needs answering, not as a routine addition to every appointment, and you are entitled to ask what question a proposed scan is meant to answer before agreeing to it.

​

And none of this removes the need for an examination. Images sent by email are useful for deciding whether a consultation is worth your time. They are not enough for a treatment plan, an appointment count or a final price, and no equipment changes that.

​

Common questions about the equipment

Is a CBCT scan safe?

A CBCT scan involves more radiation than a single dental X-ray and considerably less than a medical CT scan of the head. It is taken when a specific question needs a three-dimensional answer, such as bone volume before an implant or the position of a nerve before a wisdom tooth is removed, rather than routinely. If a scan is proposed, ask what it is intended to show.

Can I have a copy of my scans and X-rays?

Yes. Images are digital and can be given to you as files, which is worth having whether you are seeking a second opinion, continuing treatment elsewhere, or returning to your own dentist after treatment here.

Do I need a new scan if I already have one?

Often not. Bring what you have, including OPG images and CBCT files from another clinic, and it will be assessed before anything new is taken. A recent scan of adequate quality is usually usable.

Does laser treatment replace anaesthetic?

Not as a rule. Some superficial soft-tissue procedures are comfortable with little or no anaesthetic, but this depends on the procedure and on you, and it is discussed case by case rather than promised in advance.

Is any of this relevant for a routine check-up?

The digital X-rays, the intraoral camera and the ultrasonic scaler are, and they are part of ordinary general treatment rather than an extra. The rest applies to surgical and cosmetic cases.

You can see the rooms and equipment on the visual tour, the full range of treatment on the services page, and how treatment is sequenced for patients travelling in on the dental tourism page. To discuss your own case, book a consultation and bring any recent images with you.

​

Frequently Asked Questions

What dental technology does Advanced Dental Care Center use?
We use a range of advanced dental technology, including digital X-ray units, intraoral cameras, dental lasers, ultrasonic scalers, autoclave sterilization systems, and physiodispensers for implant procedures — all aimed at making treatment more precise, comfortable, and efficient.

What is a digital X-ray, and how is it different from traditional X-rays?
Digital X-rays use significantly less radiation than traditional film X-rays and produce instant, high-resolution images that can be viewed and enlarged immediately on a screen, allowing for faster and more accurate diagnosis.

What is an intraoral camera used for?
An intraoral camera is a small, pen-shaped device used to capture close-up images inside your mouth, allowing you to see exactly what your dentist sees on a screen — making it easier to understand your treatment needs and track changes over time.

Is laser dentistry safe?
Yes, laser dentistry is a well-established, FDA-recognized technology used for a wide range of procedures, including cavity treatment, gum contouring, and teeth whitening, often with less discomfort than traditional methods.

What is an autoclave, and why does it matter?
An autoclave is a sterilization device that uses high-pressure steam to eliminate bacteria, viruses, and other pathogens from dental instruments, ensuring a safe, sterile environment for every patient.

What is a physiodispenser used for in implant procedures?
A physiodispenser is a precision surgical device used during implant placement to control drilling speed and torque accurately, supporting a safer, more controlled procedure.

Does using advanced technology make treatment more expensive?
Not necessarily — while advanced technology represents an investment in equipment, it often makes procedures faster, more precise, and more comfortable, which can reduce the number of visits needed and improve long-term outcomes.

How does ultrasonic scaling differ from traditional teeth cleaning?
Ultrasonic scalers use high-frequency vibrations to remove plaque and tartar more efficiently and comfortably than manual scaling tools, while also flushing out bacteria from below the gumline.

​